ForceSurf 2500 is an Engineered Bio based technology for enhanced load recovery in fractionally wetted low permeability reservoirs. ForceSurf 2500 performs in complex and mature oil fields, and has shown superior performance for heavy oils. The bonded bio based solution exhibits rapid forming wetting properties, exceptional reduction of surface tension and interfacial tension, and non-alkane dispersion properties over a broad range of API gravity petroleum.
An economically advantageous product that will maximize hydrocarbon recovery in complex and fractionally wetted reservoirs. To find a solution using chemically engineered fluids designed toremove fluid load from the reservoir matrix while maintaining or increasing porosity to enhance fluid communication in the formation via the fracture network. When formulated with dispersants for paraffin and asphaltene fractions,the efficiency of fracture fluid production increases. These agents combine the benefit of more efficiently managing heterogeneous hydrocarbons with interfacial tension reduction at a competitive cost.
FORCE CHEM SOLUTION
FORCE CHEM ForceSurf 2500 premier load recovery penetrant is engineered to outperform other high end flow aids and microemulsions on the market that lower surface and interfacial tension properties. The product provides management of non-oil hydrocarbons at treatment rates of 0.5 to 2.0 gpt depending on the reservoir characteristics. The ForceSurfTM 2500 core surfactant is manufactured from biological sources with a low carbon footprint as compared to analogs from fossil fuel sources. Additionally,ForceSurf 2500 is a water-based fluid additive more miscible in water wet or fractionally wetted reservoirs. Using ForceSurf 2500 in this way lowers completion chemical costs and extends the production curve for the life of the well.
- Low interfacial tension
- Disperses asphaltenes and paraffin in oils
- Quick long-lasting surface tension reduction
ALL PROPERTIES @ 25°C
COLOR : LIGHT BROWN TO DARK BROWN
pH : 1.0 – 3.0
SPECIFIC GRAVITY : 1.10 ±0.05
FREEZING POINT : -2.0°C
BOILING POINT : 97.0°C
Confidential: The information contained herein is based on data considered accurate with representative samples. However, no warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof. The above data does not imply specifications for this product. Force Chem Technologies, LLC assumes no responsibility for personal injury or property damage to vendees, users or third parties, caused by the material. Such vendees or users assume all risks associated with the use of the material. Consult the Material Safety Data Sheet before using this product.