- Highly effective anionic friction reducer
- Designed for use in fresh water and light KCl water
- Versatile formula can replace up to three products and reduce inventory carrying costs
- Minimizes hydraulic horsepower usage by lowering surface treating pressures
SLICKFORCE 1102 is a low charge, high molecular weight anionic friction reducer designed to reduce friction in water-based fracturing applications.
FEEDING AND DOSAGE
SLICKFORCE 1102 dosages vary depending on temperature and fracturing fluid characteristics. Typical dosages range from 0.25 to 1.0 gallons per 1000 gallons of fluid. Actual dosages should be determined prior to the application in order to achieve desired optimum fluid characteristics.
Appearance : White emulsion/light petroleum odor
Charge : Anionic
Pour Point : -20.0u00b0F
Flash Point : >200.0u00b0F
Density : 6.96 – 7.17 lbs/gal
SLICKFORCE 1102 is compatible with all anionic and nonionic surfactants and other additives that may be present in a typical slickwater frac system.
HANDLING AND STORAGE
SLICKFORCE 1102 should be stored between 40 and 90u00b0F and protected from freezing. The shelf life of SLICKFORCE 1102 is at least six months in unopened containers. Read the label and Material Safety Data Sheet for complete handling information before using or storing this product.
HMIS Hazard Rating: Health = 1 Fire = 1 Reactivity = 0
Confidential: The information contained herein is based on data considered accurate with representative samples. However, no warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof. The above data does not imply specifications for this product. Force Chem Technologies assumes no responsibility for personal injury or property damage to vendees, users or third parties, caused by the material. Such vendees or users assume all risks associated with the use of the material. Consult the Material Safety Data Sheet before using this product.